R&M Materials Handling ELECTRIC CHAIN HOISTS LoadMate Chain Hoist LM 5 - Manual (Page 51)

LM05 SERIES II I&M MANUAL/EN/11.30.2010
51/89
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
7.17 Control Panel Layout – Three Phase – Single Speed Hoist –
208/230 volts
Table 8. Control Panel (Three-Phase Single-Speed Hoist 208/230v) Parts List
ITEM DESCRIPTION
L1 HOIST POWER SUPPLY – PHASE 1
L2 HOIST POWER SUPPLY – PHASE 2
L3 HOIST POWER SUPPLY – PHASE 3
PE POWER SUPPLY GROUND
X1 TERMINAL STRIP ON PRINTED CIRCUIT BOARD
X6 TERMINAL STRIP ON CONTROL TRANSFORMER – NOTE JUMPER CONNECTIONS
BRAKE (-) BRAKE COIL SUPPLY (NEGATIVE)
BRAKE (+) BRAKE COIL SUPPLY (POSITIVE)
X23 PUSH BUTTON PLUG CONNECTION
X24 MOTORIZED TROLLEY PLUG CONNECTION
K10 MAIN LINE CONTACTOR
K21 HOIST “UP” CONTACTOR
K22 HOIST “DOWN” CONTACTOR
K25 HOIST TWO-SPEED FAST CONTACTOR
T100 CONTROL TRANS FORMER
F100 FUSE HOLDER POSITION 230 VOLT OR 460 VOLT SUPPLY
F101 FUSE HOLDER POSITION 208 VOLT ONLY
T1 thru T9 MOTOR SUPPLY LEADS