Live view of ip camera on monitor, Live view of ip camera on internet explorer, Free – ZMODO ZP-KC1H04-P 4 Channel 720P PoE NVR System - Quick Installation Guide User Manual

Page 2: Second method: search your lan

Advertising
background image

Power on NVR, you will see the NVR log

interface, enter the default password

“111111”, and click [OK].

1

Click [IPC Manage], this will take you to the “IP Camera

Config”section.

2

Click [One Step to Add] to automatically search the IP cameras

in LAN. System will automatically add 4 cameras at one time.

3

Just wait 5-10 seconds, you will be able to see the video

stream.

4

Navigate to 192.168.1.10 (NVR’s default IP address, or search

by IPCSearch) in your browser, this will take you to the login

section. Enter the default UserName “111111” then Password

“admin”, and click [OK].

1

You will be prompted with “This website wants to

install the following add-on”. Click [Install] to run

the necessary controls.

2

It may need 30 seconds to download the controls.

System will automatically enter to the preview

interface. Double click the device or channel to

see the video.

3

Enter “Login”(Default: admin) and “Password”

(Default: 111111), then click [Finish].

5

Launch ZViewer on your PC, enter “User Name”

(Default: admin) and “Password” (Default: 111111),

then click [Login].

1

Second Method: Search your LAN

Note

:

NVR and PC must be in the same LAN.

Follow the steps below to troubleshoot issue.

Wireless Security System

If you ever have any problems setting up or

using this product, call the TOLL-FREE

number below for additional assistance.

Telephone Service Hours: Mon-Fri 8:00am-8:00pm CST
Please go to www.zmodo.com/support-software/ to

download the installation software and user manual.

FREE

866-551-6881

Go back to the Live interface, right click the device

from the list, and select "open video", the video stream

will display in the first available window.

6

Find “Discovery”, and click [Search] on left bottom

to search device.

2

Click [Add all] to add your devices, you will be

prompted after successfully adding them.

3

Go back to the Live interface, right click a device

name from the Device List, then click [Open Video].

4

The video can now be seen within your local

network.

5

LIVE VIEW OF IP CAMERA ON MONITOR

4

LIVE VIEW OF IP CAMERA ON INTERNET EXPLORER

5

Unable to access IP Camera by 3G or Internet
Ensure router’s hotspot is turned on.

Ensure [UPNP] is enabled on the router.

Advertising