AEG AS103 User Manual

Page 7

Advertising
background image

6

Unpacking and assembly (1)

•

Check that all parts are in the box.

•

Carefully insert the upper stick into the lower main

body (1a). Make sure that the cable does not jam.

•

Secure the upper stick by tightening the locking

screw (1b).

•

Fit the floor nozzle towards the vacuum cleaner.

Starting to vacuum clean

•

Release the cable by rotating the upper cable

holder (2), and plug the cable.

•

Start / Stop (3a).
1; Off
2; On

•

Start / Stop (3b)*
1; Off
2; Medium power
3; Maximum power

Floor nozzles (4)

Carpet / Hard floor nozzle (4a)

Carpets: Use with the lever in position (A).

Hard floors: Use with the lever in position (B).

Parquet nozzle (4b)*

Use for wooden floors.

* = Certain models only.

Disimballaggio e montaggio (1)

•

Controllare che nella confezione siano presenti tutti

i componenti.

•

Inserire con attenzione il bastone superiore nel

corpo principale inferiore (1a). Assicurarsi che il

cavo non si inceppi.

•

Fissare il bastone superiore serrando la vite di

bloccaggio (1b).

•

Inserire la bocchetta per pavimenti

sull'aspirapolvere.

Avvio della pulizia

•

Rilasciare il cavo ruotando il supporto superiore (2)

e collegare il cavo alla presa.

•

Accensione/spegnimento (3a)
1 ; Spento
2 ; Accensione

•

Accensione/spegnimento (3b)
1 ; Spento
2 ; Potenza intermedia (per uso prolungato)
3 ; Massima potenza di pulizia

Bocchette per pavimenti (4)

Bocchetta per tappeti/pavimenti duri (4a)

Tappeti: utilizzare con la leva in posizione (A).

Pavimenti duri: utilizzare con la leva in posizione (B).

Bocchetta per parquet (4b)*

utilizzare per pavimenti in legno.

Auspacken und Zusammenbau (1)

•

Vollständigkeit des notwendigen

Verpackungsinhalts überprüfen.

•

Oberes Stabelement vorsichtig in das Geräte-

Unterteil einsetzen (1a). Darauf achten, dass das

Kabel nicht eingeklemmt wird.

•

Oberes Stabelement durch Anziehen der

Feststellschraube sichern (1b).

•

Bodendüse am Staubsauger anbringen.

Staubsaugen

•

Kabel durch Drehen des oberen Kabelhalters (2)

freigeben und an Netzsteckdose anschließen.

•

Ein- und Ausschalten (3a)
1; Aus
2; Ein

•

Ein- und Ausschalten (3b)
1 ; Aus
2; Mittlere Leistung (für längeren Betrieb)
3; Maximale Reinigungsleistung

Bodendüsen (4)

Umschaltbare Kombi-Bodendüse (4a)

Teppiche: Mit dem Hebel in Stellung (A) verwenden.

Hartböden: Mit dem Hebel in Stellung (B) verwenden.

Parkettbürste (4b)*

Für Holzböden verwenden.

* = Nur bestimmte Modelle.

* Solo per alcuni modelli

GB

D

I

Advertising