Powersolve UMS Series - Manual

Powersolve Electronics Ltd., Unit 8A Arnhem Road, Newbury RG14 5RU, United Kingdom
Tel 0044 (0)1635 521858 Fax 0044 (0)1635 523771
www.powersolve.co.uk [email protected] p.1/3 03.12B
(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)
UMS DIN Rail
Made in Germany
Electronic DC Power Switch 600...2400W
MOSFET Relay
Short Specification:
•
Power supply: 24Vdc ± 20%
•
DIN-Rail 35mm mounting
•
Screw terminal plugs for AWG16-AWG4
•
Interference resistant
•
High reliability
•
Minimum heat emission
•
High efficient
•
Free air convection
•
Mounting space only 50mm
•
Up to 2400W signal switching capacity
•
Control In-/outputs galvanic insulated
•
Switching current up to 320A
•
Switching voltage up to 120Vdc
•
Sense control
•
Power-MOSFET output
•
Low RDS
on
•
Unlimited operation switches
•
Left-/right operation mode
•
Left-/right control confirmation signal
•
Safety : cUL60950/16950 IEC(EN)60950-1
•
EMI/EMS: EN55022 class B
Intelligent Power Switch for Automation &
Drives – replaces excessive conventional
relay solutions
Applications:
Motor drives, Breaks, valves, slide feeds,
magnet coils
Control functions:
The Camtec Power-Crash-Control circuit
protects from short circuits while switching
process. The sense polarity is reversed
congruent to the outputs.
Control In-/Outputs:
Galvanic insulated with photo couplers
In accordance with IEC60950-1