Powersolve SM6000 Series - Manual (Page 6)

SM6000
Page 1 - 6 SPECIFICATIONS Rev. Sept. 2012
Con nec tions an a log pro gram ming con nec tor
CV= Con stant Volt age
CC= Con stant Cur rent
Spec i fi ca tions mea sured at
t
amb
= 25 ± 5 °C and Vin = 400 V AC, 50
Hz, 3 phase, un less oth er wise noted.
The in for ma tion in this doc u ment is
sub ject to change with out no tice
Pro gram ming Con nec tors
Sense Block Out put Ter mi nals In put Con nec tor
Mas ter/
Slave
NO Line Cord
sup plied
Feet are not mounted
but included in packing
an a log
(stan dard)
RS232, CANopen, PROFIBUS,
Ethernet user I/O (all optional)
Ethernet, IEEE488,
iso lated an a log (all op tional)
In ter Lock Sta tus Re lay
Safety Cov ers sup plied for in- and out put (not shown)
Note: SM300-20 and SM 600-10 stan dard with iso lated an a log pro gram ming via ISO AMP on CON H (CON E is not avail able).