Approved Optics Approved JUNIPER XENPAK-1XGE-LR - Manual (Page 2)

Approved Optics, Inc. www.ApprovedOptics.com
Page 2 of 5
XENPAK-1XGE-LR-A
XENPAK-LR 10GB Module
1310nm, 10K, SMF, SC RoHS6
Optical Characteristics
Parameters Symbol Min. Typ. Max. Unit
Center Wavelength λC 1290 1310 1330 nm
Signaling speed - 10.3125 - Gbit/s
Signaling speed variation from
nominal
-100 - +100 ppm
Optical modulation amplitude OMA -5.2 - - dBm
Optical Output Power Pf -5 0 dBm
Optical Waveform - -
Side Mode Suppression Ratio Sr 30 - - dB
Extinction Ratio Er 3.0 5.5- - dB
Off Transmit Power Poff - - -30 dBm
Optical Output turn-off Time TTX-OFF - - 100 μs
Receiver Sensitivity in OMA OMArmin -21- - -7 dBm
Receiver Overload Rro +0.5 - - dBm
Receiver Return Loss RL 12 - - dB
Electrical Performance
Parameter Symbol Min. Typ. Max. Unit
Supply Voltage VCC1 3.135 3.300 3.465 V
Supply Voltage VCC2 1.152 1.200 1.248 V
Supply Current ICC1 - - 1.4 A
Supply Current ICC2 - - 1.7 A
Power Consumption PDS - - 2.2 W
Power supply stabilization time TDF - - 500 ms
Initialization Time TINIT - - 5 s
RESET Assert Time TRESET 1 - - ms
Hold Time after rising edge of
RESET
THOLD 500 - - ms