Vonnic VVRHD1620M 16CH HD-SDI 1080P High Resolution DVR (Hard Drive Not Included) - Manual (Page 60)

Page
60
o SPEED – Allows the user to select CONTROLLER SPEED
o ID – Allows the user to select CONTROLLER SPEED
 CAMERA PTZ – Allows the user to select PTZ CAMERA CHANNEL
o NAME – Allows the user to select PTZ protocol
o SPEED – Allows the user to set PTZ SPEED
o ID – Allows the user to select PTZ ID
 MOTION
o CHANNEL – CH 1 ~ 16 (Allows the user to select CHANNEL for MOTION setting)
o MOTION ZONE – FULL ZONE, PARTIAL ZONE (Allows the user to select MOTION
ZONE)
o MOTION SENSITIVITY – 1 ~ 9 (Allows the user to set MOTION SENSITIVITY)
 KEY TONE – OFF, ON (Allows the user to turn KEY TONE OFF or ON)
 REMOTE CONTROLLER ID – 00 ~ 99 (Allows the user to set REMOTE CONTROL ID)
 SENSOR – 1 ~ 4 (Allows the user to select SENSOR Number)
o TYPE – OFF, NORMAL OPEN, NORMAL CLOSE (Allows the user to set SENSOR
TYPE)
10-4. STORAGE
 OVERWRITE – ON, OFF (Allows the user to set OVERWRITE of the HDD ON or OFF)
 NOTE: Enabling OVERWRITE will allow the DVR to write over previously recorded
data, starting with the oldest date, when the HDD is FULL. If OVERWRITE is OFF, the
DVR will not record any new data once the HDD becomes full.
 RECORDING LIMIT – OFF, ON (Allows the user to set the RECORDING LIMIT)
o RECORDING LIMIT DAYS – 1 DAY ~ 90 DAYS (Allows the user to set RECORDING
LIMIT DAYS)
 S.M.A.R.T – Allows the user to set S.M.A.R.T feature.
o TEMPERATURE LIMIT – 20 ~ 55 (Allows the user to set the HDD TEMPERATURE
LIMIT to trigger ALARM and BUZZER)
NOTE: The recommended operating temperature for HDD is between 40C to 50C (104F to 122F)
o ALARM – ON, OFF (Allows the user to set ALARM ON or OFF)
o BUZZER – ON, OFF (Allows the user to set BUZZER ON or OFF)