dbx DriveRack 220i - Manual (Page 43)

39
220i
DriveRack ® User Manual
5.2 - Stereo/Dual Mono System Processing
Hardware
1. Connect the outputs of the mixer to the inputs of the DriveRack.
2. Connect the outputs of the DriveRack to the inputs of the amplifier.
3. Making sure that all outputs are muted, apply power to the mixer and amplifiers.
Software
1. Select Program 1 - Stereo & AFS.
2. Load the program by pressing the Program Up and Down buttons on the front panel, or from
the DriveWare GUI.
3. Adjust the individual parameters for the system by selecting the Processing Modules from the
DriveWare GUI.
Stereo / Dual Mono System Processing
Provides:
EQ
Feedback Suppression
Bandpass Filtering
Limiting
Delay
Compression
Application Guide
Section 5