Difficult accessing inserts – 3B Scientific Chester Chest™ With New Advanced Arm User Manual
Page 10

www.vatainc.com
fig. 19
0420
0430
0440
Difficult Accessing Inserts
The model is supplied with three different Difficult Accessing Inserts. These are used
alone or in conjunction to simulate various difficult accessing scenarios. All the inserts
have the part numbers on them for easy identification.
DIFFICULT ACCESSING INSERT 0420
for simulation of a “wandering” or
“floating” port. Remove the 0430 insert
and replace with the 0420. The #420
should be located in the upper left hand
corner. For best results in simulating a
wandering or floating port, place a small
amount of K-Y or other lubricating jelly
under and on top of your port. This will
vary by the type of port used
(see fig.
19)
. Place the port in the center of the
depressed area and reattach the Chest
Tissue Flap. When you palpate the port,
it will move around.
10