3B Scientific High Voltage Power Supply 6 kV (230 V, 50__60 Hz) - Manual (Page 4)

Page 4 of 4
3B Scientific - www.3bscientific.com
Chassis/ground/earth. The outputs are floating with respect to ground.
The output or the may be connected to this socket.
Caution: Do not connect another high voltage (more than 500 V DC) between any of
the outputs and chassis/ground/earth !!! - or the internal transformer will be permanently
damaged.
!
Digital LED-display, 3 digits.
Continuous reading of the adjusted voltage.
0 ... 6000 V DC output, max 2 mA load.
Continuously adjustable. Outputs are floating and the positive or the
negative output should be connected to the chassis/ground/earth.
An external voltage of maximum 500 V DC may be added between
any of the outputs and chassis/ground/earth.
Primary fuse. Unscrew cap to replace fuse.
Mains input: U21060-115: 115 V, 50/60 Hz
U21060-230: 230 V, 50/60 Hz
Power cable is delivered with the power supply:
U21060-115: US-type 5-15P / C13
U21060-230: EU-type Schuko, IEC-320-C13