Xoro HSD 8450 - Manual (Page 90)

38 HSD 8450
Engl
ish
SETUP
Audio Setup Page
Channel Delay
Before you can set the channel delay, please
pay attention that the Downmix is switched
off.
You can set the channel delay for the Center
speaker, Subwoofer, Right and Left surround
speakers.
Start the Chennel Delay option by pressing
the ENTER button and choose the speaker
which you want to set by using the
S
or
T
buttons. By pressing the W or X buttons you
can set the channel delay in centimetres.
Higher Values produces a stronger delay.
Equalizer
The equalizer settings are divided into Equalizer, Bass-boost, Super-Bass and Treble-Boost.
Equalizer
With this option you can change the sound output by presets equalizer settings. This presets
are good for listening music and different music styles. The presets or options are:
Rock, Pop, Live, Dance, Techno, Classic, Soft and Off.
Bass-Boost
The option Bass-Boost changes the bass output into deep and powerful bass sound.
Super-Bass
The Super-Bass settings increases the bass sound much more than the Bass-Boost option.
Treble-Boost
The option Treble-Boost changes the treble sound output into higher level. Please uses this
option carefully, because the increasing of the treble can be distorts the sound and make a
strong influence to the sound quality.
3D Processing
The 3D processing includes settings for Dolby-Pro Logic II and the hall effects.
Dolby Pro Logic II
The Dolby Pro Logic II affords a surround sound on stereo speakers, which is nearly similar
to an 5.1 speaker set. Additional two operation methods are by Dolby Pro Logic II possible:
Movie Mode and Music Mode.
In both mode you have some additional settings for adjustment the sound mode.