3B Scientific Sine Wave Generator User Manual
Page 3
Elwe Didactic GmbH • Steinfelsstr. 6 • 08248 Klingenthal • Germany • www.elwedidactic.com
3B Scientific GmbH • Rudorffweg 8 • 21031 Hamburg • Germany • www.3bscientific.com
Subject to technical amendment
© Copyright 2008 3B Scientific GmbH
•
Increase the amplitude using the amplification
control (7) (do not exceed the maximum
permitted power for the equipment that is
connected).
4.2 Operation as a sine wave generator with power
output
•
Set switch S2 (8) to the generator position (right).
•
Turn the amplitude control knob (2) fully to the
left.
•
Connect the pair of output sockets (9) to the load
(e.g., low frequency loudspeaker U8432780, horn
loudspeaker U8432680, vibration generator
U56001, 12V DC motor U8552330, etc.).
•
Increase the amplitude using the amplitude
control (2) (do not exceed the maximum
permitted power for the equipment that is
connected).