Neutrik MPS - Manual

A
Same procedere for MSC & MMC housing with
female or male inserts!
Put bushing onto the cable.
Prepare cable as shown.
Only crimp version:
Wire contacts:
Snap the contacts into the insert.
Press the distance sleeve / chuck onto the cable.
Slide insert and chuck into the housing and fasten
the bushing.
Slide crimp ferrule onto the cable.
- Crimp ferrule, only for cable O.D. 4.5 - 6.0 mm
- Crimp ferrule + reduction ferrule 1,
for cable O.D. 3.3 - 4.4 mm
- Crimp ferrule + reduction ferrule 2,
for cable O.D. 2.5 - 3.2 mm
Solder standard contacts.
For crimp contact use our HX-CONTACT crimp tool
with the appropriate positioner (see ordering info)
Contact Arragement:
Male Female
A
B
C
D
E
B
F
C
G
reduction ferrule 2
reduction ferrule 1
crimp ferrule
G
F
G
F
G
G
Only crimp
version:
Only crimp version:
G 2
3
4
5 6
11 7
12 10 8
9 2
3
5 6
11 7
12
9
4
10 8
G
[0.157"]
4.0 mm
[0.590"]
15.0 mm
For crimp ferrule only.
When using standard chuck twist shield.
D
E
NEUTRIK AG
NEUTRIK Zürich AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
( )
LI
CH
USA
UK T: F:
T: F:
T: F:
T: F:
+423 / 237 24 24 +423 / 232 53 93
+41 44 / 736 5010 +41 44 / 736 5011
+1 732 / 901 9488 +1 732 / 901 9608
+44 1983 / 811 441 +44 1983 / 811 439
Draft. Nr.: BDA 126 Update: 29.09.2009 3102M1231 / I I
Data subject to change without prior notice. 2009 NEUTRIK . ALL RIGHTS RESERVED. © ®
NEUTRIK
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK Vertriebs GmbH
Ltd. Hong Kong
DE / NL / AT
FR
JP
HK T: F:
T: F:
T: F:
T: F:
+49 8131 / 280 890 +49 8131 / 280 830
+33 1 / 4131 6750 +33 1 / 4131 0511
+81 3 / 3663 4733 +81 3 / 3663 4796
+852 / 2687 6055 +852 / 2687 6052
www.neutrik.com
ASSEMBLY INSTRUCTION
miniCON
Cable Connector
Standard & Crimp Version
|