Dexter Laundry T-120 (On-Premise) - Manual (Page 10)

- 10 -
closes and the system will "lock out". No further attempts at ignition will be performed automatically. It is then
necessary to interrupt electrical power to the ignition system before making another attempt to light the burners.
This can be done by opening the dryer door, allowing the dryer to come to a stop for 15 seconds, closing the door,
and pushing the "Start"
button . The dryer will then repeat the ignition trial cycle.
DRYER SHUTDOWN
To render the dryer inoperative, turn off the main gas shut-off valve and disconnect electrical power to the dryer.
IT IS RECOMMENDED THAT THE INSTALLER TEST THE DRYER FOR OPERATION AND INSTRUCT THE
USER BEFORE LEAVING THE INSTALLATION.