Factory Direct Hardware Delta 710LF-HDF - Manual

Electronic Basin/Sink Faucet
3000T & 3001T Series Adjustable Program
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP–3000T Rev. F
* Mixing Valve supplied by others. Flowrates are at 60 PSI.
(1) With Thermostatic Limit Stop. (2) Optional spouts R3, R4, R7 and R35 only available in this series due to fixed gooseneck supplied. (3) Hydro Power ♥ available. Add suffix -HP.
Refer to www.specselect.com for individual models. Note: Use this page front and back, with specification drawing page referenced above, as product submittal sheets.
Engineer/Architect Approval
Model Specified:
Approval: Date:
Specification: (example)
• Battery (4 ‘C’ cell) or Hardwire (24 VAC) infrared electronic handwash system
• H
2
O PTICS ™ technology – no external adjustments required
• Chrome plated one piece cast main body with integral sensor and rigid spout
• Field adjustable water resistant program controller with LCD screen
• Controller retains adjusted settings in event of power failure
• Visual battery strength indicator
• Forged brass solenoid valve (control box No. 0 only)
• Tempered water supplied to solenoid valve, (except control box options No. 0, 1 and 2)
and... with... (specify battery or hardwire)
with... (add spout required)
with... (add outlet required)
with... (add control box required)
with... (add suffix -KS if required - See Back Page)
with... (add suffix -HP if required - See Back Page)
with... (transformer - specify separately - See Back Page)
3001T3470A
0 0 0
SPOUT & SENSOR OUTLET CONTROL BOX
2 2 2
1 1 1
3 3 3
5 5 5
7 7 7
9 9 9
4 4 4
6 6 6
8 8 8
Base Model with
Surface
✭ount Housing*
SEE Specification Drawing #5 (3)
For RECESSED MOUNTING
Components ASSEMBLED in 10" Box
w/S/S Cover. *
SEE Specification Drawing #6
Vandal Resistant
1.5 USGPM (5.7 L/min)
Laminar w/Agion
♣
Antimicrobial
Vandal Resistant
1.5 USGPM (5.7 L/min)
Flow Control Aerator
For SURFACE MOUNTING
Components ASSEMBLED in 10" Box
w/Aluminum Cover. *
SEE Specification Drawing #6
(R5) Single Hole Deckmount
Gooseneck Spout with
Integral Sensor in Base (2)
(R5) Deckmount Gooseneck
Spout with Integral Sensor in
Base and 4" Forged
Coverplate (2)
(R5) Gooseneck Spout
with Integral Sensor in
Base and 8" Forged
Coverplate (2)
Smooth End, Laminar Flow
Control in Base of
Gooseneck Spout
1.5 USGPM (5.7 L/min.)
For RECESSED MOUNTING
Components & Thermostatic Mixing Valve
ASSEMBLED in 10" Box w/S/S Cover.
SEE Specification Drawing #8
For SURFACE MOUNTING
Components & Thermostatic Mixing Valve
ASSEMBLED in 10" Box w/Aluminum Cover.
SEE Specification Drawing #8
For RECESSED MOUNTING
Components & Mechanical Mixing Valve (1)
ASSEMBLED in 10" Box w/S/S Cover.
SEE Specification Drawing #7
For SURFACE MOUNTING
Components & Mechanical Mixing Valve (1)
ASSEMBLED in 10" Box w/Aluminum Cover.
SEE Specification Drawing #7
✔ ✔ ✔
Smooth End, Laminar Flow
Control in Base of
Gooseneck Spout
0.5 USGPM (1.9 L/min.)
TECK ®
COMMERCIAL
DESCRIPTION PRODUCT NO.
Hardwire 3000T3 A
Battery Operated 3001T3 A
Hardwire with Battery Backup 3000T3 A -BB