Braun 5570 Silk-épil X'elle - Manual (Page 10)

11
This is a normal reaction and should
quickly disappear, but may be stronger
when you are removing hair at the root
for the first few times or if you have
sensitive skin.
If, after 36 hours, the skin still shows
irritation, we recommend that you
contact your physician.
In general, the skin reaction and the
sensation of pain tend to diminish
considerably with the repeated use of
Silk·épil.
In some cases inflammation of the skin
could occur when bacteria penetrate
the skin (e.g. when sliding the appliance
over the skin). Thorough cleaning of the
epilation head before each use will mini-
mise the risk of infection.
If you have any doubts about using this
appliance, please consult your physician.
In the following cases, this appliance
should only be used after prior consul-
tation with a physician:
– eczema, wounds, inflamed skin
reactions such as folliculitis (purulent
hair follicles) and varicose veins
– around moles
– reduced immunity of the skin, e.g.
diabetes mellitus, during pregnancy,
Raynaud’s disease
– haemophilia or immune deficiency.
Some useful tips
Epilation is easier and more comfortable
when the hair is at the optimum length of
2–5 mm (0.08–0.2 in.) If hairs are longer,
we recommend that you either shave first
and epilate the shorter re-growing hairs
after 1 or 2 weeks.
When epilating for the first time, it is
advisable to epilate in the evening, so that
any possible reddening can disappear
overnight. To relax the skin we recom-
mend applying a moisture cream after
epilation.
Fine hair which re-grows might not grow
up to the skin surface. The regular use of
massage sponges (e.g. after showering)
or exfoliation peelings helps to prevent
ingrowing hair as the gentle scrubbing
action removes the upper skin layer and
fine hair can get through to the skin
surface.
Description (see page 4)
A Massaging rollers
a EfficiencyPro cap
2 Epilation head
3 Release buttons
4 Switch with incorporated «smartlight»
5 Socket for cord connector
6 Cord connector
7 12 V transformer plug
8 Narrow epilation head
9 Precision head
Before starting
Your skin must be dry and free from
grease or cream.
Before starting, thoroughly clean the
epilation head you want to use.
To remove the epilation head, press
the release
3 buttons on the left and
right and pull it off.
Plug the cord connector
6 into the
socket 5 and plug the transformer
plug 7 into an electrical outlet.
How to epilate
1 Make sure one of the attachments A
or a is attached to the epilation head.
To turn on the appliance, slide switch
4 to the «optimal» setting. For reduced
•
•
•
•
98841983_SE5570_S6-.indd 11 98841983_SE5570_S6-.indd 11 10.12.2008 12:20:40 Uhr 10.12.2008 12:20:40 Uhr