Crown Audio Commercial Audio Series (14M-28M) - Manual (Page 10)

Commercial Audio Series Mixers
page 10 Operation Manual
2.5 Wire Your System
Typical input and output wiring is shown in Figure 2.6.
INPUTS: Connect microphones or balanced line-level
sources to mixer balanced inputs. Set Mic/Line switches
accordingly. Connect unbalanced line-level signals to
RCA input connectors.
OUTPUTS: Maintain proper polarity (+/–) on output
con nectors.
For more application drawings, see the enclosed
Commercial Audio Mixer Quick-Start Guide.
NOTE: Crown provides a reference of wiring pin
assign ments for commonly used connector types in the
Crown Amplifi er Application Guide available at www.
crownaudio.
2 Setup
Figure 2.6 Input and Output Wiring
Satellite Receiver
Dual Drive CD
DVD / VCR
LM-201
LM-301A
PZM-11LLWR
CD
280A, 180A or 1160A
Power Amplifier