Breaching Technologies Pry Breaching Door - Manual (Page 5)

Thank you for your purchase and use of the BTI Breaching Door system. This innovative
and patent pending training device provides realistic training scenarios that are discussed
on the following pages.
Warranty
Your new BTI Training door includes a 1-year manufacturer's warranty that covers
quality and workmanship or 1500 breaches, which ever comes first. If at any time you
are unsatisfied with this product or its operation, please feel free to contact us using any
of the options listed under contacts below.
Replacement Parts
The BTI Pry Door has been designed to utilize a disposable wood section for insertion of
the prying tool. Although these sections can be purchased from BTI at a nominal cost,
theses items may also be obtained from a local lumber supply company. The nominal
dimensions are 2
1 /
4
x 1 5 /
16
x 13 inches.
Although we don’t anticipate any other items that would need replacing other than the
skin of the door, please contact us to discuss these items.
Maintenance
Paint scratches should be touched up to prevent rust from occurring. While any paint will
suffice, we recommend RUST-OLEUM in Hammered Black.
Contacts
You may contact BTI using any of the following methods:
Mail: Breaching Technologies Inc. Web: www.breachingtechnologies.com
P.O. Box 701468 Phone: (210) 590-5152
San Antonio, Texas 78270 (866) 552-7427 toll free
Fax: (210) 590-5193
Email: [email protected]
Caution
This BTI product weighs approximately 200 lbs. The door should be secured by
insertion of a breaching pin or other means during transport and moving. The
movement of the unlatched door can and has caused injury.