iSound Theater Sound - Manual - Manual (Page 16)

16
WALL MOUNTING THE THEATER
SOUND
We recommend having this speaker professionally mounted.
By using the included wall mounting accessories, the speaker can be
mounted onto a wall.
You will need
• 2 screws
• 2 anchors
• Level
• Manual or Power Screwdriver
• Pencil
• Tape Measure
1. Use the TAPE MEASURE to decide how high you would like to hang
the Theater Sound on the wall. The Theater Sound must be hung
within 6 feet of an AC power outlet for the attached AC power cord to
reach.
2. Mark the position of the mounting screws on the wall using a pencil.
3. Line the LEVEL up on both of your marks to ensure they are level. If
they are not, adjust the marks as needed to make them level.
4. After you’ve double checked your markings, drill holes in the wall
suitable for the screws or anchors. Be sure to use the correct types of
anchors and screws for your wall.
5. Screw the wall mounting screws into the anchors if necessary.
6. Use the LEVEL to check that the mounting screws are level.
7. Slide the brackets of the Theater Sound onto the screws in the wall
and make sure there is a firm and stable connection before letting go
of the unit.
8. Finally, use the LEVEL to confirm that the Theater Sound is level.
612m m