Anchor Audio RescueMAN Emergency System - Manual (Page 2)

MADE IN USA
SIX YEAR WARRANTY
RescueMAN Owners Manual
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
2
BACK PANEL OF RESCUEMAN
BASIC SYSTEM OPERATION
NOTE: Fully Charge Batteries Before First Use!
1. Position the RescueMAN with the front/speaker
facing toward your audience.
2. Connect Mic-50 microphone to the 1/4” MIC jack
3. Turn the RescueMAN Power/Volume Level knob on,
the red POWER LED will light and remain lit during
operation.
4. Set the microphone power switch to ON.
5. Adjust the volume with the Power/Volume Level
thumbwheel.
6. To record, push “Record” button. Solid red LED light
means you can start recording
7. Push “Record” button again to stop recording. Red
LED light will turn off. (if you do not press “Record”
button to stop recording, it will automatically
stop after 28 seconds and red LED light will start
flashing.)
8. To play, push “Play” button and the recording will
repeat every 10 to 12 seconds. To stop playing,
push “Play” again.
SIREN
PLAY RECORD
SPEAKER
MIC - INPUT JACK
POWER INPUT JACK
CHARGE LIGHT
POWER LIGHT