Pfister F-042-HAK0 - Manual (Page 2)

ENGLISH
ENGLISH
3
2
FAUCET INSTALLATION
5
6
4
Thank you for purchasing this Price Pfister product. All Price
Pfister products are carefully engineered, and factory tested
to provide long trouble-free use under normal conditions. This
product is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this
product, call 1-800-Pfaucet (1-800-732-8238).
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding. Price Pfister
recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually found
under the sink or near the water meter. If you are replacing an existing faucet, remove
the old faucet from the sink and clean the sink surface thoroughly.
3 TOOLS RECOMMENDED
• Plumber’s putty • Slotted screwdriver • Phillips head screwdriver
• Pliers • Adjustable wrench • Flashlight
• Cloth
Your installation may require new supply lines and / or shut-off valves or other
additional tools.
4 ROD CONNECTION
Insert Lift Rod (4A) into hole at the back of Faucet Body (4B). Gently, slide Lift Rod (4A)
down the hole in Faucet Body (4B).
5 INSTALLING FAUCET WITH SINGLE HOLE MOUNTING
Ensure that Base Plate (5A) is pressed onto Base Ring (5B). Place a bead of plumber’s
putty in the groove along the bottom outer edge of Base Plate (5A). Assemble Base Plate
and Base Ring to Faucet Body (5C). With the handle and spout facing forward, carefully
install the Faucet Supply Hoses (5D) through the center hole of sink.
6 INSTALLING FAUCET WITH DECK PLATE
Ensure that the Plastic Putty Plate (6A) is pressed on the Deck Plate (6B). Place a bead
of plumber’s putty in the groove along the bottom outer edge of the Putty Plate (6A).
Assemble Deck Plate (6B) Putty Plate (6A) and Base Ring (6C) to Faucet Body (6D).
With the handle and spout facing forward, carefully install the Faucet Supply Hoses (6E)
through the center hole of sink.
2
5A
5B
5C
5D
6A
6B
6E
6C
6D
4A
4B