Littelfuse 596 Series - Manual

© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/19/13
Enclosed Fuseholders > Circuit Board Mounted
Cartridge Fuse Holders
Compatible Fuse Types 5×20mm
Materials
Holder: Duroplastic (Phenolplast PF), black
Cap: Thermoplastic (Polyamide PA 6.6), UL 94
V-0, black
Metal Parts: Copper alloy, corrosion protected
Terminals: Solderable, tinned
Electrical Data (23ºC)
Rated Voltage: 250V
Max. Current/Power: 6.3 A / 2.0 W
Mounting (2) Solder pins0.5×1.1mm
Protection Class & Category IP 40 (IEC 60529)
Operating Temperature -25 °C to 70 °C (consider de-rating)
Stock Conditions 10 °C to 60 °C
Contact Resistance ≤ 5mΩ
Dielectric Strength 3 kV, 50Hz, 1 min., dry
Insulation Resistance > 10 MΩ (500 V DC, 1 min.)
Solderability
235 ºC, 3 sec. (Wave)
350 ºC, 1 sec. (Soldering Iron)
Soldering Heat Resistance 260 °C, 5 sec.
Minimum Cross Section Conductor - 0.2mm 2
Marking 596, 250 V
Unit Weight 2,2 g (596) / 1,7 g (583)
Holes in the Printed Circuit Board
1,1
ø10,5
12 ±0,2
10
,25
±0
,1
5,25
12,5 1,25 ±0,15
Printed Circuit Board
5
-0,
5
+1
4 ±0,2 11,7 ±0,2
0,5
+0
,1
+0,05
+0,2
23
-0,5
+0,2
+0,1
ø1,3
12,5 +0,2
Product Characteristics
Dimensions
For new designs; please refer to holder no. 830
ø10
,3
8,5 ±0,5
15,7 ±0,4
-0
,2
Bayonet-connector-nose
Slot for screw-driver
Note: 1.00 means the number one with two decimal places. 1,000 means the number one
thousand.
FLUSh MOUNT TyPE
583 Cap
596 series Holder
596 Series Circuit Board Mount Enclosed Fuse Holders for 5×20mm Fuses
Ordering Information
Description Ordering Number packaging
Cap, 5×20 mm 583 0000 000 bulk 100
596 Series Holder 596 0000 000 bulk 100
Additional Information
Datasheet Samples Resources