Littelfuse CB Boxed Series - Manual

16 CIRCUIT BREAKERS
Type I – Automatic Reset
Cycles or continuously resets until the fault is corrected. Type I circuit breakers
are typically used to protect circuits which occasionally experience momentary
overloads such as wiper motor and headlamp circuits where a self resetting
device is preferred.
Type II – Modified Reset
Non-cycling, remains in open position while there is power to the circuit. Resets
when ignition is turned off. Type II circuit breakers are typically used in applica-
tions where fuse replacement is objectionable, such as power window, seat
and sunroof circuits.
Type III – Manual Reset
Manually resettable circuit breakers remain in the open position until a button,
lever or other external reset device is manually depressed. Type III circuit
breakers are typically used in applications where a manual reset is desired for
safe diagnosis of a circuit fault.
Bulk
Part No.
MMB 15
MMB 20
MNB 10
MNB 15
MNB 20
MNB 25
MNB 30
US
Carded No.
MMB 15 BP
MMB 20 BP
MNB 10 BP
MNB 15 BP
MNB 20 BP
MNB 25 BP
MNB 30 BP
Amp
Rating
15
20
10
15
20
25
30
Typical Application
Heavy Truck Headlamp
Automotive Headlamp
Heavy Duty Truck
Heavy Duty Truck
Automotive/Heavy Truck
Automotive/Heavy Truck
Automotive/Heavy Truck
OEM No.
GM# 12135171
GM# 12135072
GM# 12135162
GM# 12135164
GM# 12077861
GM# 12077862
GM# 12088575
GM# 12077863
Wide Mini Footprint Circuit Breakers:
Direct factory replacement for many domestic OEM applications. Designed to fit either in an ATO
®
or MINI ® Blade fuse block or panel. Their blade configuration is of the MINI design and fit in a
standard ATO fuse slot or across two MINI slots. Available in either SAE Type I cycling or SAE
Type II non-cycling used primarily as a wiring harness protector in 12 volt DC automotive systems.
Conforms to SAE J553C standard.
Bulk
Part No.
MIB 5
MIB 10
MIB 15
MIB 20
MIB 25
MIB 30
US & Canadian
Carded No.
MIB 5 BP
MIB 10 BP
MIB 15 BP
MIB 20 BP
MIB 25 BP
MIB 30 BP
Amp
Rating
5
10
15
20
25
30
MINI ® Circuit Breakers
Standard Mini Footprint Circuit Breakers:
Designed to fit in a MINI
® Blade fuse block or panel. SAE Type II used primarily as a wiring
harness protector in 12 volt DC automotive systems. Conforms to SAE J553C standard.
Cycling Design – Type I
Non-Cycling Design – Type II
Bulk
Part No.
ACB 20
ACB 30
FCB 20
CCB 25
US
Carded No.
ACB 20 BP
ACB 30 BP
FCB 20 BP
CCB 25 BP
Canadian
Carded No.
ACB 20 CABP
ACB 30 CABP
FCB 20 CABP
CCB 25 CABP
Amp
Rating
20
30
20
25
Typical Application
Automotive Headlamp
Power Windows,
& Locks
Power Windows
Headlamps, Power
Windows, Seats
& Locks
OEM No.
GM# 12040816
GM# 01252240
Chrysler# 83507005
Ford# D9AB-14526-BA
Chrysler# 4527053
Breaker
Type
Type I
Type II
Type II
Type I
Specialty OEM Circuit Breakers
Direct factory replacement for many domestic OEM vehicles. SAE Type I and Type II
modified reset used primarily as a wiring harness protector in 12 volt DC automotive systems.
Conforms to SAE J553C standard. Designed to mount in ATO style fuse blocks and panels.
CIRCUIT
BREAKERS
ACB
FCB
MNB
MMB
CCB
MIB