Littelfuse Battrax Series MS-013 Dual Port Negative - Manual

SIDACtor ® Protection Thyristors
126
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
SLIC Protection
Battrax ® Series - Dual Port Negative -
MS-013
Electrical Characteristics
The Dual Port Negative Battrax ® Series are programmable
SIDACtor ® devices designed to protect SLICs (Subscriber
Line Interface Circuit) from damaging overvoltage transients.
Dual port protection is provided by a programmable device
that is referenced to a negative voltage souce while internal
diodes provide protection from positive surge events.
Description
Agency Approvals
Agency Agency File Number
E133083
Schematic Symbol
Pinout Designation
Features and Benefits
t
Low voltage overshoot
t
Low on-state voltage
t
Does not degrade with
use
t
Fails short circuit when
surged in excess of
ratings
t
Dual-port protection
t
Gate trigger tracking
device
t
Integrated diode for
positive voltage surges
1
2
3
6
5
4
Part Number Marking
V
DRM
@l
DRM
=5μA
V
S
@100V/μs
I
H
I
S
I
T
V
T
@I
T
=2.2 Amps
V
F
Capacitance*
V min V max mA min mA max A max V max V max pF min pF max
B1101UC4Lxx B1101UC4 I-V
REF
*

*7* I-V
REF
*

*7* 100 100 2.2 4 5 30 200
B1161UC4Lxx B1161UC4 I-V
REF
*

*7* I-V
REF
*

*7* 160 100 2.2 4 5 30 200
B1201UC4Lxx B1201UC4 I-V
REF
*

*7* I-V
REF
*

*7* 200 100 2.2 4 5 30 200
(T1) 1
(R1) 3
(-VREF) 2
5 Ground
6 (T2)
4 (R2)
Notes:
- Absolute maximum ratings measured at T
A
= 25ºC (unless otherwise noted).
- Devices are uni-directional
- All electrical characteristics shown are defined from Tip (pin 1 & 6) to Ground (pin 5) and
Ring (pin 3 & 4) to Ground (pin 5)
- V
REF
Max Value for the negative Battrax is -200 V.
- XX = Part Number Suffix: ‘TP’ (Tube Pack) or ‘RP’ (Reel Pack).
* Off-state capacitance (C
O
) is measured across pins 1 & 5, 3 & 5, 4 & 5, and 6 & 5
at 1 MHz with a 2V bias.
Applicable Global Standards
t
TIA-968-A
t
TIA-968-B
t
ITU K.20/21 Enhanced
Level
t
ITU K.20/21 Basic Level
t
GR 1089 Inter-building
t
GR 1089 Intra-building
t
IEC 61000-4-5
t
YD/T 1082
t
YD/T 993
t
YD/T 950