Littelfuse 814 Series - Manual

© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/19/13
Enclosed Fuseholders > Circuit Board Mounted
Cartridge Fuse Holders
Product Characteristics
Dimensions
FOR 6.3×32MM FUSES
FOR 5×20MM FUSES
Fuse carrier inserted
Bayonet-joint
max. 0,2 5,5
45,7
Æ
15
12,7
Printed circuit board
12,7
0,5
1,65
Æ2 -0,05
Stud
27,94 7,62 1,9
5
15
0,5
1,1
Holes in the printed circuit board:
5,08
7,62 27,94 Stud
2 + 0,1
1,3 +0,1
1,3 +0,1 17,8 2 +0,1 10
Holes in the printed circuit board: 1,3 +0,1
Stud
Fuse carrier inserted Bayonet-joint
max. 0,2 45,7
Printed circuit board
5,5
1,65
2 -0,05
Stud
17,8
0,5
10 7,9
15
5,7
13,8
1,1 +0,1
0,5
Fuse carrier inserted
max. 0,2
46,3
Æ 12,7
∅ 15
Bayonet joint
0,6
3
5
5,08
1,1
Printed circuit board
12,7
12,7
Holes in the printed circuit board: 1,3 +0,1
7,62
4,45
1,3 + 0,1
5,08
ø15
0,5
P.
0, 6 3
ø12,7
12,7
12,7
max.
0,2
1,1
46,3
10 ±0,1
5
Fuse carrier inserted
body
Printed circuit board
flange
e
10 ±0,1
1,3 +0,
Bayonet-joint
Æ
9,2
7
Slot for screwdriver
max. 34
1,5 1,2
Cap 815
Bayonet-connector-nose
max. 33,8 Cap 816
810 series Holder
811 series Holder
813 series Holder
814 series Holder
815 Cap
816 Cap
810 Series 811 Series
813 Series 814 Series
815/816 Cap
810 Series 811 Series 813 Series 814 Series
Compatible
Fuse Types 5×20mm
6.3×32mm 5×20mm
6.3×32mm 5×20mm
6.3×32mm 5×20mm
6.3×32mm
Materials
Holder/Cap: Black Thermoplastic Polyamide PA 6.6, UL94 V-0
Metal Parts: Copper alloy, corrosion protected
Terminals: Solderable, tinned
Electrical
Data (23ºC)
Rated Voltage: 250V
Rated Current: 6.3A (VDE/SEMKO) 16A (UL/CSA)
Rated Power:
2.5W (VDE/SEMKO)
RatedPower:
1.6W
(813+815
- VDE/
SEMKO) 2.5W
(813+815 -
VDE/SEMKO
Rated Power:
2.5W (VDE/
SEMKO
Mounting
(3) Solder
pins 0.5mm
× 1.1mm and
plastic stud.
The pins
spaced at
5.08mm form
a common
connection.
(4) Solder
pins 0.5mm
× 1.1mm
The pins
spaced at
5.08mm form
a common
connection.
(2) Solder
pins 0.5mm
× 1.1mm and
plastic stud
(2) Solder pins
0.5mm ×
1.1mm
Protection
Class &
Category
IP 40 (IEC 60529) PC2 (IEC 60127-6)
Operating
Temperature
-25 °C to 70 °C (consider de-rating)
Climatic Test -25ºC/+70ºC/21 days (IEC 60068-2-1...3)
Stock
Conditions
+10ºC to +60ºC relative humidity ≤ 75% yearly average,
without dew, maximum value for 30 days - 95%
Vibration
Resistance 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60Hz at
0.75mm amplitude 60 - 2000Hz at 10g acceleration
Contact
Resistance
≤ 5mΩ
Dielectric
Strength
> 1.5 kV
Impulse
Voltage 4 kV, 50 Hz, 1 min., dry
Insulation
Resistance
> 10 3 MΩ (500 VDC, 1 min.)
Solderability 235ºC, 3 sec. (Wave) 350ºC, 1 sec. (Soldering Iron)
Soldering
Heat
Resistance
260ºC, 5 sec. (IEC 60068-2-20)
Min Cross
Section
Conducting path - 0.2mm 2
Marking
810, 250V,
Approvals
811, 250V,
Approvals
813, 250V,
Approvals
814, 250V,
Approvals
Unit Weight
5.4g(Holder)
/ 2.5g (Cap)
5.2g(Holder)
/ 2.5g (Cap)
5.8g (Holder)
/ 2.5g (Cap)
4.6g (Holder)
25g (Cap)
810/811/813/814 Series Circuit Board Mount Enclosed Fuse Holders
Agendy approvals and ordering infornation is included on the next page.