Littelfuse SDP Series SOT23-5 - Manual (Page 2)

SIDACtor ® Protection Thyristors
2
Revised: August 6, 2013
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Teccor ® brand SIDACtor ® DSL Protection Devices
Parameter Name Symbol Test Conditions Value Units
Lightning surge waveforms I
pp
8x20µs 50 A
min max
Operating Free Temperature Range T
A
-40 +85 °C
Junction temperature T
J
-40 +150 °C
Storage temperature T
STG
-40 +150 °C
Maximum Ratings
Notes:
- The device also complies with IEC 61000-4-2 ESD ±15kV (air discharge), ±8 kV(contact discharge) and IEC 61000-4-4 EFT 40A(5/50nS) in equipment level ESD test when used behind the
xDSL transformer.
- The device must initially be in thermal equilibrium with -40°C < T
J
< +150°C
Mechanical dimensions, recommended layout dimensions
E
B
D
A
A2
A1
C
F
G
0.138(3.5)
0.047(1.2)
0.037(0.95)
0.024(0.60)
0.037(0.95)
Dimension are in inches
(and millimeters).
Dimension
Inches Millimeters
Min Max Min Max
A 0.035 0.057 0.90 1.45
A1 0 0.004 0 0.10
A2 0.035 0.051 0.90 1.30
B 0.014 0.020 0.35 0.50
C 0.004 0.008 0.09 0.20
D 0.11 0.118 2.80 3.00
E 0.059 0.069 1.50 1.75
F 0.102 0.118 2.6 3.00
G 0.004 0.024 0.10 0.60
The epoxy meets UL 94V-0 ratings .
- The lightning surge may be repeated after the device returns to its initial conditions.