Littelfuse LEB Series - Manual (Page 2)

POWR-GARD ® Blocks and Holders Datasheet
littelfuse.com © 2014 Littelfuse POWR-GARD ® Products
Rev: 012414
2 of 6
In-LIne WatertIght Fuse hoLders
serIes desCrIPtIon
LEB One-pole in-line fuse holder for Midget and Class CC fuses
LEC One-pole in-line fuse holder for Class CC fuses
LET
One-pole in-line fuse holder with
permanently installed solid neutral
LEX Two-pole in-line fuse holder for Midget and Class CC fuses
LEY Two-pole in-line fuse holder for Class CC fuses
Ordering Information
To order Littelfuse in-line fuse holders by part number,
refer to the charts on the next page.
Recommended Crimping Tools
The following crimping tools or equivalents may be used
on either the non-breakaway or breakaway watertight
in-line fuse holders.
LEB - AA - S
Littelfuse Series
Load Side/Terminal Size
Breakaway Feature
Line Side/Terminal Size
terMInaL sIze t&B Part nuMBer Burndy Part nuMBer
A WT161M –
B WT161M MR4C
C M5-GREY Hypress Y34A
D M5-BROWN Hypress Y34A
4.5"
10.3"
( ASSEMBLED LENGTH )
5.4"
( ASSEMBLED LENGTH )
4.5"
9.3"
( ASSEMBLED LENGTH )
WPB1 BOOT
(OPTIONAL)
WPB1 BOOT
(OPTIONAL)
INSULATING BOOT
(STANDARD)
INSULATING BOOT
(STANDARD)
4.2"
4.5"
9.3"
( ASSEMBLED LENGTH )
10.3"
( ASSEMBLED LENGTH )
5.3"
( ASSEMBLED LENGTH )
Dimensions Inches
1-Pole
1-Pole Breakaway
2-Pole
2-Pole Breakaway
A & B Crimp Terminal
C & D Crimp Terminal
J Terminal
Y Terminal
Insulating Boots
• Molded from engineering-grade thermoplastics which
provide high resistance to corrosive environments
• For watertight protection of non-breakaway Y-pole
termination, order one WPB1 and one WPB3 boot
orderIng nuMBer terMInaL tyPe
WPB1 A, B, C, D, J
WPB3 Y