Ocean Optics QE65 Pro User Manual
Page 15
2: Installing the QE65 Pro
220-12200-000-02-201303
9
Control
Description
Enable Fan
Check this box to turn on the cooling fan.
Enable Thermo-
Electric Control
Check this box to enable (recommended setting for laboratory conditions) or
uncheck to disable the thermoelectric cooler. Be sure to always turn on TEC
power before applying USB power.
Detector Set Point
Enter the target temperature of the QE65 Pro Spectrometer detector. The default
is -10ºC. The TEC and fans will operate until the detector reaches this
temperature.
Detector
temperature
Displays the current temperature of the detector in the QE65 Pro Spectrometer.
Enable Periodic
Update
Check this box to enable periodic update of the QE65 Pro detector temperature
controls.
Update Interval
If you enabled periodic updates, enter the interval period (in seconds).
Show in Status Bar
Check this box to display the detector temperature in the status bar.