Ocean Optics CHEM2000 - Manual (Page 10)

1: Introduction
• Color Temperature. Enter the color temperature of your reference light source used in relative
irradiance measurements.
Acquisition Parameters
Set data acquisition parameters by choosing an integration period and selecting averaging and boxcar
smoothing values.
Text Box
Enter the operator name, or any other identifying text here. This text appears in your data files. You can
edit this text at any time.
Step 3: Receive Data
Run OOIChem in Scope Mode and take a reference spectrum and a dark spectrum (see Experiment
Tutorial for details). Choose the absorbance, transmission, or relative irradiance mode to take your
sample measurements.
4 PRELIMINARY DRAFT 105-00000-CHM-02-0405