Ocean Optics HL-2000-HP-232 - Manual (Page 10)

1: Setup
2 000-10000-140-02-201307
2. Inspect the outside of the instrument and make sure that there is no damage. Do not use the
instrument if damage is present. Contact your dealer for repair or replacement information, if
necessary.
3. Use this instrument in a clean laboratory environment.
Package Contents
Your package should contain the following:
 One HL-2000-HP-232 Light Source
 One serial cable
 One 24 VDC 1,2A power supply
 HL-2000-HP-232 test software
 One Ocean Optics Software and Technical Resources CD
In addition, you need an optical fiber (1000 μm diameter fiber is recommended).
Set-Up
Use the following procedure and diagrams to set up your light source.