Sampling optics, Application tips, Specifications – Ocean Optics S1024DW Install User Manual

Page 39

Advertising
background image

36

Sampling Optics

Ocean Optics offers numerous spectroscopic accessories. A short description of those accessories featured
in this manual is listed below.

•

The 74-UV and 74-VIS Collimating Lenses screw on to the end of SMA-terminated optical fibers and
other sampling optics to convert divergent beams of radiation (light) into a parallel beam.

•

The 74-UV-90 Reflector for collimating lenses has a mirror located under its cap that reflects light
from the collimating lens to 90°.

•

The 74-OPM Optical Post Mount is a 3/8-24 threaded black anodized aluminum assembly used for
mounting collimating lenses on breadboard laboratory tables, rail carriers and other bench plates.

•

The 74-ACH Adjustable Collimating Lens Holder is a versatile assembly for mounting lenses at
multiple positions, and is especially useful for large or thick samples.

•

FVA-UV Fiber Optic Variable Attenuator decreases the magnitude of light entering the optical bench.

•

The WS-1 Diffuse Reflectance Standard is a compact physical standard for use in performing diffuse
reflectance measurements, especially color analysis.

•

The ISP-REF Integrating Sphere is an illuminated sampling optic that couples via optical fiber to our
spectrometers to measure reflectance of solid objects or emission of spectral sources.

Sampling Optics: 74-UV and 74-VIS Collimating Lenses

The 74-UV and 74-VIS C

OLLIMATING

L

ENSES

screw on to the end of SMA-terminated optical fibers and

other sampling optics to convert divergent beams of radiation (light) into a parallel beam. In order to
obtain accurate data, the light entering the sample and the light collected after exiting the sample must be
well collimated.

Application Tips

•

Using a collimating lens is easy. Screw a collimating lens onto the end of any SMA-terminated port to
collect, shape, or focus light.

•

Collimating lenses are useful for any optical setup that requires the acceptance or transmission of
parallel beams of light at either the illumination source or at the entrance optics -- or at both ends
(illumination and read) of the setup. That's important because the optical fibers Ocean Optics specifies
for use with its spectrometers and light sources have a field of view (FOV) of ~25

°

-- an acceptance

angle that may not be appropriate for some experiments. Collimating lenses are adjustable, providing
FOV angles from collimation (near 0

°

) to ~45

°

. Without the collimating lenses, the light would

disperse more than is required for efficient transmission and collection of the signal.

•

For directions on adjusting the focus of a collimating lens, see

Appendix A

.

Specifications

Lens diameter:

5 mm

Lens length:

10 mm

f-number:

f/2

74-UV material:

Dynasil 1100 quartz (200 nm – 1.5

µ

m)

74-VIS material:

BK 7 glass (360 nm - 2

µ

m)

Lens barrel:

stainless steel with black oxide finish

Threads:

3/8-24

Advertising