Ocean Optics HR4000CG-UV-NIR - Manual (Page 30)

B: HR4000 Specifications
210-00000-000-02-0908
Specification Value
Entrance aperture 5, 10, 25, 50, 100 or 200 µm wide slits
Order-sorting filters Installed longpass and bandpass filters
Focal length f/4, 101 mm
Optical resolution Depends on grating and size of entrance aperture
Stray light <0.05% at 600 nm; <0.10% at 435 nm
Dynamic range 2 x 10 9 (system); 2000:1 for a single acquisition
Fiber optic connector SMA 905 to single-strand optical fiber (0.22 NA)
Data transfer rate
Full scans into memory every 4 milliseconds with USB 2.0 port,
every 600 milliseconds with the serial port
Integration time 3.8 ms to 10 seconds
Interfaces
USB 2.0, 480 Mbps (USB 1.1 compatible); RS-232 (2-wire); SPI
(3-wire); I
2 C Inter-Integrated Circuit 2-wire serial bus
Operating systems
Windows 98/Me/2000/XP, Mac OS X, and Linux when using the
USB port Any 32-bit Windows operating system when using the
serial port
Onboard GPIO 10 user-programmable digital I/Os
Analog channels One 13-bit analog input and one 9-bit analog output
System Compatibility
The following sections provide information on hardware and software requirements for the HR4000.
Compatibility for Desktop or Notebook PCs
To use the HR4000, you must have a PC that meets the following minimum requirements:
• IBM-compatible PC with Pentium (or higher) processor
• 32 MB RAM
• OOIBase32 Spectrometer Operating Software
• Windows 98/ME/2000/XP operating system (when connecting the HR4000 to a PC via USB
port)
OR
22