Ocean Optics OOISensors - Manual (Page 96)

6: Hardware Data Sheets and Instructions
FOXY-RESP Respiration Probe
The FOXY-RESP Respiration Probe is typically used for measuring oxygen tension in respiratory gasses.
It is composed of a 2-meter cluster of seven 200-
µm fibers in a Torlon jacket. The probe can withstand
pressure up to 300 psi and temperature up to 80 ° C.
See Oxygen Sensing Probes – General Information at the beginning of this chapter for information on
cleaning and sterilizing oxygen probes.
FOXY Respiration Probe
FOXY-RESP Specifications
Specification Value
Fiber bundle (7) 200 µm core diameter fibers (6 illumination, 1 read)
Fiber assembly length 2 meters
Fiber jacketing Torlon
Outer diameter ¼”
Amount of pressure that can be
applied
300 PSI
Probe temperature range -80 ºC to 80 ºC
Connector SMA 905
Response time (without overcoat) < 50 msec (no overcoat)
86 FOXY-AL300-000-02-0207