Ocean Optics MPM-2000 - Manual (Page 10)

1: Setup
2 000-10000-120-02-1209
Unpacking the MPM-2000
► Procedure
1. Unpack the Optical Multiplexer carefully. Dropping this instrument can cause permanent
damage.
2. Inspect the outside of the instrument and make sure that there is no damage. Do not use the
instrument if damage is present. Contact your dealer for repair or replacement information, if
necessary.
3. Use this instrument in a clean laboratory environment.
4. Submit the Registration Card to for warranty and support purposes.
Contents
Your MPM-2000 Optical Multiplexer package should contain the following:
 MPM-2000 Main System
 MPM-2000 24VDC Power Supply
Caution
Before using the power supply of the MPM-2000 for the first time, inspect the item for
transport damage. Be sure to adhere to all warnings on the unit and in this operational
manual.
 Software CD (contains MPM-2000 software and Calibration software)
 PC-MPM-2000 Serial Cable