2 connecting hardware, Figure 4.4. 5v power connection to the hellodevice – SENA HD1300 User Manual
Page 13
Advertising
![background image](/manuals/292691/13/background.png)
Starter Kit and User Manual for the HelloDevice 1300
13
4.2 Connecting Hardware
(1) Connect the 5V power supply adaptor to the HelloDevice.
5V Power
110/220 V
HelloDevice
Figure 4.4. 5V power connection to the HelloDevice
(2) Connect the HelloDevice to the Ethernet hub through the RJ45 connector.
(Refer to the Chapter 3 Main Board Specifications for more details on the RJ45 connector.)
Hub or Switch
Ethernet Cable
5V Power
110/220 V
HelloDevice
Ethernet backbone
Figure 4.5. Connection of the HelloDevice and Ethernet cable
(3) Check to see if the Tx LED of the HelloDevice Status Display LED blinks periodically in one-second
interval. (See the [Status LED] in the Figure 3.1)
Advertising