SENA Promi-ESD02 User Manual
Page 20
Promi-ESD User Manual – Configurations
20
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-ESD has 4 response messages, ‘OK’, ‘ERROR’, ‘CONNECT’, and
‘DISCONNECT’. In some cases, these responses can affect the host system
unexpectedly. To prevent this, user can set the response to ON or OFF. (AT
Command)
For Promi-ESD, hardware flow control can be configured only by bridge CTS
and GND. Thus H/W Flow Control option will not work in this case.
Click [Apply] button to reflect the given options to Promi-ESD actually.
Connect icon will show the following window to search and connect other
Bluetooth devices.
Click [Search] button to search nearby Bluetooth devices. The maximum number
of devices to be searched can be controlled. Select one of the devices searched
and click [Connect] button. The selected Bluetooth device must be in Page scan
mode. Click [Disconnect] button to cancel the connection normally.
Connection(in) icon will show the following window to make Promi-ESD wait to
a connection from the other Bluetooth device. The waiting time in seconds can be
controlled. With 0 input for this waiting time, Promi-ESD keeps waiting for
connection until [Cancel] button is clicked.