Billet Specialties Premium Tru Trac Serpentine System - Small Block Chevy - Manual (Page 9)

Small Block Chevy Tru Trac - 13220 / 13120 www.billetspecialties.com • Tech Line 708.588.0505 17 16
Figure 11: Install Crankshaft Pulley
A] Apply Loc-Tite to the threads of the three 3/8-24 x 1” socket head cap
screws and place a Belleville washer with the cup facing away from the
socket head on each fastener.
B] Place the crank pulley on damper and align holes. Thread the three
3/8" cap screws with washers through pulley and into damper, tighten
firmly (50 ft/lbs.).
Figure 12: Install Water Pump Pulley
Apply Loc-Tite to the threads of the four 5/16-24 x 1/2” socket head cap
screws.
Place the water pump pulley to the water pump and thread the cap
screws through pulley and into water pump pulley flange, tighten firmly
(28 ft/lbs.)
A
B
Figure 13: Install Compressor Clutch Cover
Apply Loctite Blue 242 to the following:
(3) 1/4-20 x 3/4” socket head cap screws
Place cover on clutch and thread the socket head cap screws through
the cover and into the clutch, torque to 40-45 inch/lbs.
Caution: Over tightening these fasteners will cause damage to the
compressor clutch. Do Not Over Tighten.