Mustang Motorcycle Seats Studded Solo Seat with Driver Backrest, Black Studs Harley-Davidson FLHR User Manual
Page 2

These steps are guidelines to help you install your new Mustang product. If you need
further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30
Eastern or send an e-mail to
or visit our website at
Ref: part #'s 75566, 79101
Mounting of Mustang Seat
1. Engage nose of seat, pushing seat as far forward as possible so that the mounting
holes/studs in the fender are in the middle to back edge of the slotted tabs.
2. A firm downward chop to the nose of the seat will push the seat closer to the chrome
dash.
3. Seat is spring loaded for a tight fit so the mounting tabs will be approximately 1" - 1 1/2"
above the fender.
4. The supplied nylon washers go between the mounting tabs and the fender.
5. Start one mounting bolt/nut to finger tight, do second then secure both.
Enjoy the Comfort of your new Mustang Seat!