Mustang Motorcycle Seats Cyclone Frame Mounting Plate 2009-2013 Road King, FLHT, FLTR & FLHX Street Glide User Manual
Page 2
Page 2 of 3
Continued from page 1
The T‐bracket can be bent up or down with pliers for
the best fit at the dash. If there is a gap between
the frame mounting plate and dash the hook and
loop flexible nose extension disc (adjustable skirt
wire cover) can be positioned under the dash to hide
the dash mounting bracket or wires.
Bend T-Bracket if needed
Hook and loop
flexible nose
extension disc.
Engage the frame mounting plate’s front T‐bracket
under the motorcycle’s tongue bracket. Slide
frame mounting plate forward until the two
fender studs align with the holes in the rear of the
frame mounting plate. The rear mounting holes
can also be made into an oval shape with a file if a
custom fit is desired.
Use the supplied
chrome ¼‐20 acorn nuts
and washers to fasten
the frame mounting
plate to the bike.
Mounting Suggestions for Harley‐Davidson® FLHT, FLHX, FLTR,
FLHR 2009‐up, Cyclone Solo Seat and Frame Mounting Plate