Mustang Motorcycle Seats Tripper Solo Seat - Harley-Davidson Dyna Glide User Manual
Page 2
These steps are guidelines to help you install your new Mustang product. If you need
further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30
Eastern or send an e-mail to
or visit our website at
5HISDUW V
Enjoy the Comfort of your new Mustang Seat!
Mounting of Mustang Passenger Seat
1. Remove screw from rear of solo.
2. Align spool washer on top of the solo bracket and bolt
down to the fender with the supplied bolt.
3. Secure rear bracket to baseplate of passenger seat with
supplied screws. Use the set of holes closest to the rear
of the seat for all Dyna Wide Glide models and second
set of holes for all Dyna Glide models. (Fig. I)
4. Engage slotted bracket on the front of the passenger
seat into spool washer. (Fig. II)
5. Secure rear of passenger seat to fender with stock screw
which was removed from solo. NOTE: If mounting on a
model without the fender clip nut as shown (Fig. III), use
the supplied shoulder washer.
Fig. I
Bracket shown in Dyna Wide Glide Position
Fig. II
Fig. III