Mustang Motorcycle Seats Sport Touring One-Piece Vintage Seat - Harley-Davidson FLT - Manual

Mounting Suggestions:
1965-1988 FLH, FLT
One-Piece Sport Touring Seats
A. Baseplate Features
One-piece sport touring seats are constructed on extra
rugged, triple layered fiberglass.
Note: Mustang FL seats mount to stock handrails. If the
handrail is removed, fender bracket #78007 is
needed in its place.
B. Mounting of Mustang seat
1. Remove washers and nuts from studs on baseplate
of seat.
2. Engage nose tab(s) under frame. Nose tab usage var-
ies with bike model and year.
3. Align rear studs with holes in stock handrail or FL seat
bracket #78007; secure with washers and nuts.
1980-88 FLT shown
These steps are guidelines to help you install your new Mustang product. If you need
further assistance, please call us at 800-243-1392 or 860-582-9633, Monday through Fri-
day 9:00 - 5:30 Eastern or send an e-mail to
[email protected] or visit our
website at www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Ref: part #'s 75040, 75041, 75042, 75045, 75046, 75047, 75233, 75235
Enjoy the comfort of your new Mustang seat.
Seat #75233 shown
Seat mounting bracket #78007
1965-1984 FLH shown
Nose bracket for 1980-
1982 FLT