Mustang Motorcycle Seats Studded Rear Seat - Harley-Davidson FXR User Manual
Page 2
Mounting of Mustang Solo Seat
1. Remove OEM hinge and latch system and
mount to the Mustang seat. (Fig. I)
2. Latch seat to the frame.
Fig. I
Fig. II
Enjoy the Comfort of your new Mustang Seat!
Mounting of Mustang Passenger Seat
1. Install stock fender bolts and washers into the
fender.
2. Engage front slots in baseplate under washers
onto stock fender bolts.
3. Secure stock fender bolts.
4. Align rear tab with stock fender screw.
5. Secure rear tab with stock fender screw
Optional Mustang Mounting Bolts (sold separately)
1. Install Mustang Seat Bolts (Part #78027-
5/16”-24 thread) into fender locations. (Fig. II)
2. Engage front slots in baseplate into slots on
bolts.
3. Align rear tab with threaded hole in fender.
4. Secure rear tab with stock fender screw
These steps are guidelines to help you install your new Mustang product. If you need further assistance, please
call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern, or send an email to
[email protected], or visit
For care and maintenance of our seats, please go to our website under
Refers to part numbers: 75321, 75515, 75518, 75083, 75520, 75521, 75737, 75760, 75765, 75523, 75528,
75529
Updated 10/14/10 AA
Mounting Suggestions: Harley-Davidson® FXR 1982-94 & 1999-00 Two-Piece Seat continued
from page 1)