Mustang Motorcycle Seats Wide Touring Two-Piece Vintage Seat - Honda VTX 1300 Retro, No Studs, No Conchos - Manual (Page 2)

These steps are guidelines to help you install your new Mustang product. If you need further assistance,
please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern, or send an email to
[email protected], or visit our website at www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Ref part #75800, 75801, 75906, 75907, 79320, 79321, 79326, 79327
Mounting of Mustang
1. Slide the nose bracket into the receiver under
the fuel tank. Make sure the bracket goes into
the receiver and not on top.
2. Push the solo forward until the side brackets
line up with the frame mounts. Secure the solo
with the stock 8 mm bolts.
3. Slide the tongue (Fig. I)on the front of the
passenger seat into the receiver (Fig. II) on
the solo seat.
4. Push the passenger seat forward to align the
rear mounting bracket with the fender hole.
Secure using the stock 6 mm screw to
complete the installation process.
Step 1
Step 2
Step 3 (Fig. I)
Enjoy the Comfort of your new Mustang Seat!
Step 3 (Fig. II)
Step 4