Mustang Motorcycle Seats Studded Fender Bib - Yamaha Road Star User Manual
Mustang Motorcycle Seats For motorcycles

These steps are guidelines to help you install your new Mustang product. If you need further
assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern or send an
e-mail to [email protected] or visit our website at www.mustangseats.com.
Ref. part #’s 78072, 78073
Mounting Suggestions
Yamaha Road Star 1600 & 1700
Fender Bib
Tools Required:
• Phillips Screwdriver
Hardware:
• Stock Fender Screw
Mounting of Mustang Fender Bib
1. Remove seat.
2. Secure rear of bib with stock fender screw.
3. Secure front of bib with stock fender screw or under rear tab of Mustang solo.
4. Reinstall solo.
NOTE: Mustang recommends removal of fender bib before reinstalling rear seat.
Mounting a rear seat over a fender bib may result in damage to the bib, poor seat alignment or
other problems.
Enjoy the custom look of your new Mustang Fender Bib!
Studded Fender Bib
Plain Fender Bib