Mustang Motorcycle Seats Studded Tank Bib - Suzuki Boulevard C109R - Manual

Thank you and enjoy your Mustang Tank Bib!
Mounting Suggestions:
2008-10 Suzuki C109R
Tank Bib
Once the seat has been taken off the bike,
remove the single dash mounting Allen bolt with
a 5mm Allen wrench.
Slide dash forward and then up off of the tank.
Position the bib’s cutouts over tank’s protruding
mounting bosses.
Slide dash back into mounts and reinstall Allen
bolt.
Remove the 8mm bolt at the base of the gas
tank with a 12mm wrench.
Insert bolt through slotted hole at the bottom of
the bib and then reinstall.
These steps are guidelines to help you install your new Mustang product. If you need further
assistance, please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern, or send an
email to [email protected], or visit our website at www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Ref part # 93342, 93343, 73207, 93208