Technical data, Installation, Closing the door – AEG A72200GSW0 User Manual

Page 34: Positioning

Advertising
background image

Problem

Possible cause

Solution

The appliance has no power.

There is no voltage in the mains

socket.

Connect another electrical appli-

ance to the mains socket. Check

fuse. Contact a qualified electri-

cian.

The lamp does not work.

The lamp is defective.

Refer to "Replacing the lamp".

The door has been open to long.

Close the door.

Door interferes with venti-

lation grill.

The appliance is not levelled.

Refer to "Levelling".

Misaligned door.

The appliance is not levelled.

Refer to "Levelling".

As much as the advice does not lead to result, call the nearest brand-mark service.

Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer to "Installation".

3.

If necessary, replace the defective door gaskets. Contact the Service Center.

TECHNICAL DATA

Dimension

Height

1540 mm

Width

595 mm

Depth

658 mm

Rising Time

20 h

Voltage

230-240 V

Frequency

50 Hz

The technical information are situated in the rating plate on the internal left side of the

appliance and in the energy label.

INSTALLATION

WARNING!

Read the "Safety Information" carefully for your safety and correct operation of the appli-

ance before installing the appliance.

Positioning

Install this appliance at a location where the ambient temperature corresponds to the cli-

mate class indicated on the rating plate of the appliance:

34

Technical data

Advertising
This manual is related to the following products: