Universal Audio DCS-RP Manual - Manual (Page 7)

2
Remote and Base Overview
Channel A and B
Preamp Controls
GAIN, LO CUT, Phase
and +48v Phantom for
mic or DI with lockout
protection (page 3,8,9)
A TO CUE and B TO CUE
Controls monitor levels
for mics and inst. to
CUE and SPKR OUTs
(page 4)
GAIN Trim
Controls max pre
output level (dBu)
allowing gain range,
meters and PEAK
warn/clip light to
match DAW max input
level (page 3,9)
TALK routes panel mic
audio to CUE OUT
and/or TALK MIC OUT
jacks (page 6,7)
Meter Bridge is
adjustable for angled or
flat view (page 11)
Digital Display and +/-
keys select REVERB
presets, adjust EQ and
0VU level, CUE IN/OUT
trims and configuration
settings (page 7)
CUE > VU Switches VU
meters from preamp to
Cue Mix (page 6)
STEREO, A + B or MS
set preamps and
monitoring for stereo,
MS-stereo, or 2-channel
blend (page 4)
REVERB knob blends
effect with A TO CUE, B
TO CUE or A & B TO CUE
(page 5)
REVERB switch selects
from 9 presets (page 5)
C TO CUE controls
signal from C IN jacks
to Cue Mix (page 5,7)
EQ controls frequency
selective boost/cut to
the Cue Mix (page 5)
CUE VOL controls output
to CUE OUT and SPKR
OUT jacks (page 5)
SPKR MUTE switches off
signal to SPKR OUT
(page 6)
CUE OUT provides audio
playback of DAW output
and preamp output
CUE IN accepts ¼ stereo
input from any DAW or
laptop phones output
MIC and DI inputs
accept a wide range of
inputs-Mic,Line or Hi-Z
CHAN. A and CHAN. B
balanced preamp
outputs connect to DAW
Secondary A B Stereo
unbalanced preamp
outputs allow mic
splits or feeds to amps,
tuners, additional
effects, etc. (Page 2,9)
Outputs automatically
reset to +18 if unbal.
Cable is detected (page
4) DCS:link hot-pluggable
jack connects base
with remote using any
CAT-5 cable up to 300
ft.
LED indicates
connection status
(page 7)
IEC Power
Warning: unit operates
under fixed voltage and
will be damaged using
improper input voltage!
(page 7)
TALK MIC OUT provides
continuous or switched
output (page 6)
SPKR OUT speaker
connection for secondary
DAW monitoring
C IN adds additional
aux. stereo input or bal.
Cue In (page 2,7)
CUE IN MUTE cuts
signal from CUE IN jack
to the Cue Mix (page 6)