Procom CXL 2-3-ghz - Manual

CXL 2-3 GHz
Unity Gain Base Station and Marine 2 - 3 GHz Antenna for
Mounting on Threaded 1” Water pipe
DESCRIPTION
The CXL 2-3 GHz is an ultra broad-banded, 0 dBd, vertically polarized,
omnidirectional rod-type base station and marine antenna for the 2 - 3
GHz band.
The 1” revolving nut mounting system is standard throughout the
marine sector, and several different mounting brackets are available,
making it possible to install the antenna either on the masthead by use
of FLG or SMR 2, side-mounted on the mast (SMR 1) or mounted on a
cross-beam (FLG). Also, the antenna can be mounted on deck or rooftop
by means of the FLG.
The higher the antenna is mounted, the better coverage. Avoid
mounting the antenna parallel to or in the neighbourhood of other metal
parts, such as masts, supporting wires etc., otherwise the SWR and the
radiation pattern may be strongly influenced.
A conical glass fibre tube completely encloses the carefully designed
radiating element to ensure long dependable service in all climates.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
CXL 2-3 GHz 100000204
SPECIFICATIONS
ELECTRICAL
MODEL CXL 2-3 GHz
ANTENNA TYPE ½ λ coaxial dipole, broad-banded
FREQUENCY 2000 - 3000 MHz
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 2 dBi 0 dBd
BANDWIDTH ≥ 1 GHz @ SWR ≤ 2.0
SWR ≤ 2.0
MAX. POWER 100 W
MECHANICAL
TEMP. RANGE -30°C → +70°C
CONNECTOR N-female
WIND SURFACE Approx. 0.006 m²
WIND LOAD Approx. 8 N @ 160 km/h
COLOUR Marine white
MATERIALS Shroud: Polyurethane-coated glass fibre
Mounting bracket: Chromed brass
TOTAL HEIGHT Approx. 230 mm
DIA. AT TOP END 14 mm
DIA. AT BOTTOM
END
16 mm
WEIGHT Approx. 180 g
MOUNTING On 1” RG (G1”-11) threaded water pipe or on optional
mounting brackets (see below)
ACCESSORIES (to be ordered separately)