Procom MU 907-zg-... - Manual

MU 907-ZG/...
Unity Gain 1/4 λ Mobile Antenna for the 900 MHz Band
DESCRIPTION
Silicone covered flexible steel wire whip.
Type MU 907-ZG/l covers 820 – 905 MHz (e.g. for EAMPS).
Type MU 907-ZG/h covers 870 – 960 MHz (e.g. for ETACS, NMT-900 and
EGSM).
Stainless steel ZG-mount with M8 x 1-thread whip-fastening system.
Simple mounting exclusively with access from the outside.
Choice between two connection principles:
ZG-mount: FME-connection (supplied without cable).
ZGP4-mount: Permanently attached 4 m low loss cable terminated
with FME-connector.
ORDERING DESIGNATIONS
TYPE PRODUCT
NO.
FREQUENCY MOUNT VERSION
MU 907-ZG/l 130001218 820 - 905
MHz
ZG-mount
with FME
MU 907-ZG/h 130001216 870 - 960
MHz
Same mount as above
MU 907-ZGP4/l 130001219 820 - 905
MHz
ZGP4-mount with 4 m cable
and FME-connector
MU 907-
ZGP4/h
130001217 870 - 960
MHz
Same mount as above
SPECIFICATIONS
ELECTRICAL
MODEL MU 907-ZG/...
ANTENNA TYPE ¼ λ mobile antenna
FREQUENCY 900 MHz-band covered by two models
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 0 dB (acc. to EIA RS-329-1)
BANDWIDTH ≥ 80 MHz @ SWR ≤ 1.5
≥ 170 MHz @ SWR ≤ 2.0
SWR ≤ 1.2 @ f. res.
MAX. POWER 60 W
MECHANICAL
MATERIALS Whip:
Steel wire covered with silicone tubing
Black-chromed brass
Mount:
Black-chromed brass
Weather- and shockproof plastics
Stainless steel
RECOMMENDED
INSTALLATION
TORQUE
7.5 ± 1 Nm
COLOUR Black
HEIGHT Approx. 91 mm
WEIGHT ZG-version: Approx. 90 g
ZGP4-version: Approx. 230 g
MOUNTING 21 mm dia. hole