Procom PRO-TRI 60-80-100-120-... User Manual
Page 2
MOUNTING DETAILS
The PRO-TRI 60/80-100/120-... makes it possible to use only one antenna
for the operation of three transceivers (one in each range). See the figure
below. The antenna must be a triple-frequency antenna, i.e. it must be
resonant on the actual frequencies in the three bands.
The transceivers may be used independently and will have no degrading
influence on each other. Typically, the triplexer is installed next to the
transceivers and only one cable is used between the triplexer and the
antenna. The triplexer is suitable both for base station and mobile use.
The main tasks of the triplexer are to protect the individual receiver input
from being destroyed by the transceiver in the contrary bands and to ensure
a low-loss path between the transceiver and the antenna which is not
loaded by the other branches.
The triplexer can be operated together with any set of transceivers
operating within the 0 - 60 MHz, 80 - 100 MHz and 120 - 960 MHz frequency
bands.
PROCOM A/S reserve the right to amend specifications
without prior notice.
12/03/13